Quality is Our Commitment
Quality is not just a requirement — it is our commitment. From raw materials through to final inspection, Solimpeks applies international standards rigorously at every stage of production.
With our advanced ERP system (Canias), we track every component, every process, and every product with full traceability.
Quality Management System
Advanced Product Quality Planning (APQP)
Applies IATF 16949 standard requirements using Fault Mode and Effect Analysis (FMEA) for detecting process faults, Measurement Systems Analysis (MSA) for verification, and Statistical Process Control (SPC) for statistical verification.
Production Part Approval Process (PPAP)
Comprehensive files include flow charts, FMEA, MSA, SPC, quality plans, control forms, design records, material analysis/test results, customer complaints documentation, calibration records, traceability, rework data, and PPM costs.
PPAP Documentation
Customer Complaints Handling
Complaints received via email are recorded in ERP (Canias) system, investigated for root causes, with corrective actions and 8D reports prepared as needed.
Quality Control
Input Control
Purchased materials undergo necessary checks per input quality plans in ERP system. Compliant materials proceed to raw material warehouse; non-compliant items are rejected or conditionally accepted with Non-Conformance Reports sent to suppliers.
Process Control
Production phase controls conducted per quality plans, recorded in control forms. Non-compliant products are reprocessed or scrapped.
Final Control
Completed products undergo final checks recorded in control forms. Compliant products ship; non-conforming items are reprocessed or rejected.
Calibration
Measurement equipment calibrated annually by accredited organizations, tracked via ERP (Canias).
Traceability
ERP (Canias) tracks serial numbers, with process and final control records accessible via work order numbers.
Enamel Boilers Quality Standards
Production Standards Applied:
- DIN EN 4753-3 (UBA — German Federal Environmental Agency requirements)
- Commission Delegate Directive (EU) 2015/863 (European Enamel Commission)
- Eco-Design Directive 2009/125/EC
Wet Enamel Tests
- Density Measurement — Measures material amount per unit volume
- Bayer Test — Measures enamel grain size
- Enamel Set Value Measurement — Measures flow time and enamel set
Enamel Tests
- Citric Acid Resistance Test — Per TS EN ISO 28706-1 standards
- Boiling Water Resistance Test — Per TS EN ISO 28706-2 standards
- Impact Test — Per TS EN 10209 standard, determines adhesion strength
- Thermal Shock Resistance Test — Measures behavior under sudden temperature changes
- Hygienic Harmlessness Test — Migration analysis per DIN EN 12873-1 to determine toxicological risks
Heat Pump Compliance
EU Directives:
- EMC Electromagnetic Compatibility Directive 2014/30/EU
- LVD Low Voltage Regulation 2014/35/EU
- MD Machinery Directive 2006/42/EC
- PED Pressure Equipment Directive 2014/68/EU
- ECO Design Directive 2009/125/EC
- Energy Labelling 2010/30/EU
- RoHS Directive 2011/65/EU, 2015/863
- RED Radio Equipment Regulation 2013/53/EU
Quality in Numbers
Rigorous standards at every stage